MiniServer/utils.sh

#!/bin/bash

# Function to check if a package is installed
is_installed() {
  pacman -Qi "$1" &> /dev/null
}

# Function to check if a package is installed
is_group_installed() {
  pacman -Qg "$1" &> /dev/null
}

# Function to install packages if not already installed
install_packages() {
  local packages=("$@")
  local to_install=()

  for pkg in "${packages[@]}"; do
    if ! is_installed "$pkg" && ! is_group_installed "$pkg"; then
      to_install+=("$pkg")
    fi
  done

  if [ ${#to_install[@]} -ne 0 ]; then
    echo "Installing: ${to_install[*]}"
    yay -S --noconfirm --answerdiff=None --answeredit=None --answerclean=None "${to_install[@]}"
  fi
}

# Function to remove pacman/AUR packages if installed
remove_packages() {
  local packages=("$@")
  local to_remove=()

  for pkg in "${packages[@]}"; do
    if is_installed "$pkg"; then
      to_remove+=("$pkg")
    fi
  done

  if [ ${#to_remove[@]} -ne 0 ]; then
    echo "Removing: ${to_remove[*]}"
    sudo pacman -Rns --noconfirm "${to_remove[@]}"
  fi
}

# Function to enable systemd services if not already enabled
enable_services() {
  for service in "$@"; do
    if ! systemctl is-enabled "$service" &> /dev/null; then
      echo "Enabling $service..."
      sudo systemctl enable "$service"
    else
      echo "$service is already enabled."
    fi
  done
}

# Output of the last update's pacman -Su, written by updates.d/10-pacman.sh
PACMAN_UPDATE_LOG="$HOME/.local/state/miniserver/pacman-update.log"

# True if the last update rebuilt the initramfs and mkinitcpio reported a
# failure. Rebooting then can leave the machine unbootable.
initramfs_build_failed() {
  [ -f "$PACMAN_UPDATE_LOG" ] || return 1
  grep -q "Updating linux initcpios" "$PACMAN_UPDATE_LOG" || return 1
  grep -q "==> ERROR" "$PACMAN_UPDATE_LOG" || ! grep -q "Image generation successful" "$PACMAN_UPDATE_LOG"
}

# Install a script atomically (copy to a temp file, then rename over the target)
# so a copy of it that is running right now keeps reading the old file
install_script() {
  local tmp
  tmp="$(mktemp "$2.XXXXXX")" && cp "$1" "$tmp" && chmod 755 "$tmp" && mv -f "$tmp" "$2"
}

# Start Cockpit. Safe to re-run: does nothing once set up. The cockpit package
# itself comes from packages.conf; its firewall port is in firewall.conf.
setup_cockpit() {
  if ! systemctl is-enabled --quiet cockpit.socket || ! systemctl is-active --quiet cockpit.socket; then
    echo "Enabling Cockpit..."
    sudo systemctl enable --now cockpit.socket
  fi
}

# Print the rules a firewall.conf asks for, one per line, as service:<name> or
# port:<port>/<protocol>. Sourced in a subshell so the file can't change
# anything else.
firewall_entries() {
  (
    FIREWALL_SERVICES=()
    FIREWALL_PORTS=()
    source "$1" > /dev/null || exit 1
    for e in "${FIREWALL_SERVICES[@]}"; do echo "service:$e"; done
    for e in "${FIREWALL_PORTS[@]}"; do echo "port:$e"; done
  )
}

# Rules setup_firewall opened, so it knows which ones it may close again
FIREWALL_STATE="$HOME/.local/state/miniserver/firewall-opened"

# Allow what MiniServer's and each sibling project's firewall.conf ask for
# through firewalld's default zone, and make sure firewalld is running.
# Closes a rule only if setup_firewall opened it and no firewall.conf asks for
# it any more (e.g. after `sibling remove`); rules that were already there or
# were added by hand are left alone. Safe to re-run.
setup_firewall() {
  command -v firewall-offline-cmd &> /dev/null || return 0

  # firewall-cmd only works while firewalld is running; before that, write the
  # permanent config directly so SSH is allowed before the firewall comes up
  local fw running=0 changed=0 complete=1 status=0
  if systemctl is-active --quiet firewalld; then
    running=1
    fw=(sudo firewall-cmd --permanent)
  else
    fw=(sudo firewall-offline-cmd)
  fi

  local wanted=() opened=() kept=() conf out entry kind value port
  for conf in "$HOME/.local/share/MiniServer/firewall.conf" "$HOME/.local/share/siblings/"*/firewall.conf; do
    [ -f "$conf" ] || continue
    if out="$(firewall_entries "$conf")"; then
      [ -n "$out" ] && mapfile -t -O "${#wanted[@]}" wanted <<< "$out"
    else
      echo "Firewall: could not read $conf, so no rules will be closed this time."
      complete=0
      status=1
    fi
  done

  # Keep SSH reachable if sshd listens on a port other than 22. If its config
  # can't be read, don't close anything: that port could be the SSH port.
  if command -v sshd &> /dev/null; then
    if out="$(sudo sshd -T 2> /dev/null)"; then
      for port in $(awk '$1 == "port" && $2 != 22 { print $2 }' <<< "$out"); do
        wanted+=("port:$port/tcp")
      done
    else
      complete=0
    fi
  fi

  [ -f "$FIREWALL_STATE" ] && mapfile -t opened < "$FIREWALL_STATE"

  for entry in "${wanted[@]}"; do
    kind="${entry%%:*}"
    value="${entry#*:}"
    if ! { [[ "$kind" == service && "$value" =~ ^[A-Za-z0-9_.-]+$ ]] ||
           [[ "$kind" == port && "$value" =~ ^[0-9]+(-[0-9]+)?/(tcp|udp|sctp|dccp)$ ]]; }; then
      echo "Firewall: ignoring invalid $kind '$value'"
      status=1
      continue
    fi
    if ! "${fw[@]}" --query-"$kind"="$value" &> /dev/null; then
      echo "Firewall: allowing $value"
      if "${fw[@]}" --add-"$kind"="$value"; then
        opened+=("$entry")
        changed=1
      else
        status=1
      fi
    fi
  done

  for entry in "${opened[@]}"; do
    [ -n "$entry" ] || continue
    if (( ! complete )) || printf '%s\n' "${wanted[@]}" | grep -qxF -- "$entry"; then
      kept+=("$entry")
      continue
    fi
    kind="${entry%%:*}"
    value="${entry#*:}"
    if "${fw[@]}" --query-"$kind"="$value" &> /dev/null; then
      echo "Firewall: closing $value (nothing asks for it any more)"
      if "${fw[@]}" --remove-"$kind"="$value"; then
        changed=1
      else
        kept+=("$entry")
        status=1
      fi
    fi
  done

  mkdir -p "$(dirname "$FIREWALL_STATE")"
  printf '%s\n' "${kept[@]}" | sed '/^$/d' | sort -u > "$FIREWALL_STATE"

  if (( running )); then
    if (( changed )); then
      sudo firewall-cmd --reload || status=1
    fi
  else
    echo "Starting firewalld..."
    sudo systemctl enable --now firewalld || status=1
    # Docker sets up its firewalld zone only when it starts
    if systemctl is-active --quiet docker; then
      echo "Docker started before firewalld. Restart it (sudo systemctl restart docker) or reboot so its containers' ports work through the firewall."
    fi
  fi

  return $status
}